Woodburn Regional No Piece of Cake for Ahten Johnny Ahten (1 Viewer)

woodburn-Ahten-courtesy-of-Chuck-Costablile-600x401.jpg

Johnny Ahten - NHRA Woodburn2 LODRS Wrap Up 2016

Woodburn, Ore. – When you get to the drag strip on Friday for a Regional event the last thing you expect is to have your first qualifying run Sunday at 4:30pm and first round an hour and a half later. That’s just what happened to Johnny Ahten last weekend at Woodburn Dragstrip. Friday and Saturday were a wash-out and Sunday turned into a whirlwind.

“Our whole weekend got compressed into two hours of racing,” said Ahten. “On the bright side, the truck and trailer is well organized because of all the down time. Looking at the track from our pit was like a kid staring at a piece of chocolate cake they can’t eat.”

When it finally came time to make their only qualifying run, the Island Renovations / Combust Filters team made it a good one. A 5.41/261.32 pass gave Ahten his second number three qualifying spot in a row. Turn-around time was tight and the Ahten Racing team only had a short time to make the first round of eliminations. In fact, the other cars in Top Alcohol Dragster class were already in the lanes when Ahten pulled out of the pits. Lay in wait was CleanBoost Performance Motor Oil teammate Garrett Bateman. As the two nitro-injected dragsters left the line, Ahten grabbed the lead and was ahead at the 330ft mark. At 2.4 seconds into the run, the Stump Puller had a cylinder lose fire, and at 3.5 seconds another joined in. At the finish, Johnny’s 5.372 / 258.84 was not enough to hold off Bateman’s hard charging 5.274 / 272.47.

“We are just going to keep refining what we are doing,” said Ahten.”After our eighteen hour drive home from Woodburn, we began the preparations for four more races. First we have the Vegas National event, then the make-up from the rained-out spring Vegas Regional, followed by the scheduled Vegas2 Regional, ending with the finals at Pomona. We have some exciting announcements coming up for these races, so stay tuned,” added Ahten. Stay informed by visiting: facebook.com/JohnnyAhtenRacing, and on Twitter and Instagram at: @Ahtenracing


Island Renovations understands the complexity of Hawaii's homes and their customers’ needs. Whether you are looking to build, remodel, or replace your existing windows and doors, Island Renovations is there to provide outstanding service and products to give your home added value with the satisfaction and peace of mind from a company that puts their customers first. Visit us: www.islandrenovations.net

The Combust Filters Oil By-Pass Filtration System provides 3 Micron filtration, 100% Water Removal, Soot Removal, Extended Engine Life, Pollution Prevention, and Reduced Oil Consumption. By keeping the oil free of moisture contamination and particulates larger than 3 microns, your engine oil will have reduced Oxidation, Nitration, while maintaining required oil viscosity and TBN for proper lubrication. Our system incorporates only the best technology and quality construction for ease of use and installation. Features include an easy to read pressure gauge, 2 sizes of spin-on filters (7” and 12”), a push button oil sample valve, and a custom flow fitting to ensure a continuous proper flow. No internal moving parts to wear out! Visit us at: www.combustfilters.com

Release courtesy of John Rogers

Photo courtesy of Costabile Productions

and a big piece of chocolate cake
 
Ways To Support Nitromater

Users who are viewing this thread


Back
Top