Baytown, TX – Steve Gasparrelli likes racing at the Houston stop on the NHRA series schedule. This past weekend at the O’Rilly Auto Parts Spring Nationals, Gasparrelli took his ECS/801 Racing Top Alcohol Funny Car all the way to the finals. Although he didn’t win the race, Gasparrelli believes things could have worked out differently.
“I feel like we left some on the table,” said Gasparrelli. “Our car ran very well. You have to hand it to Jay Payne. He really stepped up in the finals. At the 2002 Houston race, I beat Jay to win the race. In 2004, he beat me. I believe next time we race each other in a Houston final, it’s my turn to win.”
Gasparrelli’s consistent qualifying numbers settled him in the number four slot with a best time of 5.640/259.61. That paired him up against Todd Veney in the first round of eliminations. Gasparrelli laid down his best ET to this point with a stout 5.621/259.76 to beat a tire-shaking Veney. In Sunday’s second round, Kris Hool got the starting line advantage, but Gasparrelli’s top end charge and his 5.651/258.86 was enough to defeat Hool’s 5.685/257.24. In the semi-finals, Tony Bartone lay in wait. Gasparrelli’s Team knew they had to be on their game, and as the two cars left the line glued together, Gasparrelli edged out the close win with a 5.664/257.92 over Bartone’s 5.671/261.37.
It was now finals time in Houston, and a match up with familiar opponent Jay Payne. The ECS/801 Racing Team knew the track and their opponent. Gasparrelli got the jump on Payne off the line and was leading the race until about half track. This is where Payne powered by with a 5.631/260.06 to Gasparrelli’s 5.652/259.26. Gasparrelli was happy with the final round appearance, but knew his car had a bit more in it. This only gives them the advantage in the upcoming races.
“It was a good race for us. I really want to hand it to my team and those who support us. We have been very happy with the 801 Racing 70Wt Racing Oil we have been running,” added Gasparrelli. “The parts look great after a run and they have been lasting longer too. I also would like to thank our other sponsors EndroComponent Solutions, Oceanus Plumbing, M7 Performance, CoColor, MBR Engines, and Midnight Expressions. They make it possible for us to be out here racing and going rounds.”
Going rounds and going fast is why Steve Gasparrelli is out on tour with his Top Alcohol Funny Car. Those two also combine to produce race wins. The ECS/801 Racing Team looks to add a few more trophies to the shelf. The Houston final proves that, and the competition better not count on Steve Gasparrelli leaving anything on the table from now on.
…
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 RACING
ECS provides OEM partners with a truly unique business proposition: a vertically integrated model that encompasses all facets of the manufacturing process: initial product design; raw material development; and final converting of finished product…all custom tailored to the needs of our Customer. It is the talent of our team of materials scientists combined with our proven processes in converting methodology that separate us from the others in our field. Using alternate materials and innovative product design concepts, we can improve product functionality and enhance process ability on the assembly line. The ECS team has an established track record of problem solving with market-leading partners in industry segments ranging from Hard Disk Drive, Medical to Electronics. Visit us at: ECS - Entrocomponent Solutions Custom Engineered Die Cut Components
Release courtesy of THR5 Communications
“I feel like we left some on the table,” said Gasparrelli. “Our car ran very well. You have to hand it to Jay Payne. He really stepped up in the finals. At the 2002 Houston race, I beat Jay to win the race. In 2004, he beat me. I believe next time we race each other in a Houston final, it’s my turn to win.”
Gasparrelli’s consistent qualifying numbers settled him in the number four slot with a best time of 5.640/259.61. That paired him up against Todd Veney in the first round of eliminations. Gasparrelli laid down his best ET to this point with a stout 5.621/259.76 to beat a tire-shaking Veney. In Sunday’s second round, Kris Hool got the starting line advantage, but Gasparrelli’s top end charge and his 5.651/258.86 was enough to defeat Hool’s 5.685/257.24. In the semi-finals, Tony Bartone lay in wait. Gasparrelli’s Team knew they had to be on their game, and as the two cars left the line glued together, Gasparrelli edged out the close win with a 5.664/257.92 over Bartone’s 5.671/261.37.
It was now finals time in Houston, and a match up with familiar opponent Jay Payne. The ECS/801 Racing Team knew the track and their opponent. Gasparrelli got the jump on Payne off the line and was leading the race until about half track. This is where Payne powered by with a 5.631/260.06 to Gasparrelli’s 5.652/259.26. Gasparrelli was happy with the final round appearance, but knew his car had a bit more in it. This only gives them the advantage in the upcoming races.
“It was a good race for us. I really want to hand it to my team and those who support us. We have been very happy with the 801 Racing 70Wt Racing Oil we have been running,” added Gasparrelli. “The parts look great after a run and they have been lasting longer too. I also would like to thank our other sponsors EndroComponent Solutions, Oceanus Plumbing, M7 Performance, CoColor, MBR Engines, and Midnight Expressions. They make it possible for us to be out here racing and going rounds.”
Going rounds and going fast is why Steve Gasparrelli is out on tour with his Top Alcohol Funny Car. Those two also combine to produce race wins. The ECS/801 Racing Team looks to add a few more trophies to the shelf. The Houston final proves that, and the competition better not count on Steve Gasparrelli leaving anything on the table from now on.
…
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 RACING
ECS provides OEM partners with a truly unique business proposition: a vertically integrated model that encompasses all facets of the manufacturing process: initial product design; raw material development; and final converting of finished product…all custom tailored to the needs of our Customer. It is the talent of our team of materials scientists combined with our proven processes in converting methodology that separate us from the others in our field. Using alternate materials and innovative product design concepts, we can improve product functionality and enhance process ability on the assembly line. The ECS team has an established track record of problem solving with market-leading partners in industry segments ranging from Hard Disk Drive, Medical to Electronics. Visit us at: ECS - Entrocomponent Solutions Custom Engineered Die Cut Components
Release courtesy of THR5 Communications
