Woodburn, Ore. – Whenever you go fishing there are a few things that are bound to happen. Sometimes you catch your limit, and sometimes the big one gets away. At their first trip ever to Woodburn Dragway, Chris Demke and the Maddern Racing Team came away with a few keepers, but the catch of the day eluded them. That’s fishing, or in this case, Drag Racing.
The weekend started out with a whopper. In the first round of qualifying the Peen Rite / OSI / 801 Racing Dragster ripped off a 5.322/269.86. That blast put them in the number one qualifying position. It also gave them the track record at Woodburn Dragway. This was the kind of statement the Team was looking to make. They serviced the car and returned to the line in anticipation of lowering the record. In the second qualifying session, there was a tug on the line, but it wasn’t the big fish. A wire had come loose and the car coasted down the track. Back in the pits, the wire was zip tied in place. The decision was then made to sit out the third qualifying session, as they still held the top spot.
Sunday saw the Maddern Racing Team geared up for an expected good day of fishing. The car was quick, and they knew they had something for the competition. The first round of eliminations held a chance to cast all their lines with a bye run. The car responded with a 5.338/265.87. In the second round, Chris Demke was up against Megan McKernan. A 5.350 at 267.45 was laid out on the table to McKernan’s 5.396 at 266.42. So far it was a good day of fishing; they had two keepers in the boat, and it was time to go for the big one. The final round match up saw Gregg Lawrence in the other lane. Demke got a sizable advantage at the start, but then the car hazed the tires. Tire shake followed, which caused the same wire that came out in round two of qualifying to pull out of the connector. Demke could only sit and watch as Lawrence raced to the victory, his victory. This would be the one that got away.
“Running as well as we did really says something about the ability of our car and Team,” said Demke. “The car ran some really great numbers, and getting the track record at Woodburn Dragway is special. I love this track. It’s so smooth and well prepared. It was also great to connect with so many great fans. I have never been here, but the fans knew me. On the return road they were at the fence cheering us all the time. I just wish we could have landed the big one.”
The 2012 Woodburn Regional race will be remembered by the Maddern Racing crew as a missed opportunity to get a win and the points that are associated with it. It will also be remembered as a great weekend of racing a track record run, two passes in the 5.30’s, and a shot in the finals. As fish tales go, this could be remembered as the one that got away. But it’s not the end of the season, just the end of this fishing trip. Now it’s on to another pond, and the opportunity to land a few more keepers. That elusive big fish is still swimming, and Chris Demke and the Maddern Racing gang are not going to quit until it’s theirs.
...
About Peen Rite - Your source for quality shot peening, glass bead, and abrasive blasting services for over 45 years. We provide low cost solutions, high volume capacity, and a superior level of quality control. Equipped with many specialty machines designed to handle the cleaning and surface preparation for a wide variety of work pieces. PEEN-RITE gives you the ability to stay within your job cost estimation!
Operational Solutions will challenge itself on a daily basis to provide a unique advanced technical service to our customers. Our team will work to identify the problem, procure the necessary parts, and implement the solution. We will accomplish this with an expertise and professionalism unparalleled in the PET bottle industry. Operational Solutions provides products and services for the PET blow molding industry. We are the leading independent service and support organization for SIDEL, SIG, and Krones blow molding. We serve customers around the world from our facilities in Kansas City, Missouri and France. Visit us at: www.operationalsolutions.com
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 Racing -
Release courtesy of THR5 Communications
The weekend started out with a whopper. In the first round of qualifying the Peen Rite / OSI / 801 Racing Dragster ripped off a 5.322/269.86. That blast put them in the number one qualifying position. It also gave them the track record at Woodburn Dragway. This was the kind of statement the Team was looking to make. They serviced the car and returned to the line in anticipation of lowering the record. In the second qualifying session, there was a tug on the line, but it wasn’t the big fish. A wire had come loose and the car coasted down the track. Back in the pits, the wire was zip tied in place. The decision was then made to sit out the third qualifying session, as they still held the top spot.
Sunday saw the Maddern Racing Team geared up for an expected good day of fishing. The car was quick, and they knew they had something for the competition. The first round of eliminations held a chance to cast all their lines with a bye run. The car responded with a 5.338/265.87. In the second round, Chris Demke was up against Megan McKernan. A 5.350 at 267.45 was laid out on the table to McKernan’s 5.396 at 266.42. So far it was a good day of fishing; they had two keepers in the boat, and it was time to go for the big one. The final round match up saw Gregg Lawrence in the other lane. Demke got a sizable advantage at the start, but then the car hazed the tires. Tire shake followed, which caused the same wire that came out in round two of qualifying to pull out of the connector. Demke could only sit and watch as Lawrence raced to the victory, his victory. This would be the one that got away.
“Running as well as we did really says something about the ability of our car and Team,” said Demke. “The car ran some really great numbers, and getting the track record at Woodburn Dragway is special. I love this track. It’s so smooth and well prepared. It was also great to connect with so many great fans. I have never been here, but the fans knew me. On the return road they were at the fence cheering us all the time. I just wish we could have landed the big one.”
The 2012 Woodburn Regional race will be remembered by the Maddern Racing crew as a missed opportunity to get a win and the points that are associated with it. It will also be remembered as a great weekend of racing a track record run, two passes in the 5.30’s, and a shot in the finals. As fish tales go, this could be remembered as the one that got away. But it’s not the end of the season, just the end of this fishing trip. Now it’s on to another pond, and the opportunity to land a few more keepers. That elusive big fish is still swimming, and Chris Demke and the Maddern Racing gang are not going to quit until it’s theirs.
...
About Peen Rite - Your source for quality shot peening, glass bead, and abrasive blasting services for over 45 years. We provide low cost solutions, high volume capacity, and a superior level of quality control. Equipped with many specialty machines designed to handle the cleaning and surface preparation for a wide variety of work pieces. PEEN-RITE gives you the ability to stay within your job cost estimation!
Operational Solutions will challenge itself on a daily basis to provide a unique advanced technical service to our customers. Our team will work to identify the problem, procure the necessary parts, and implement the solution. We will accomplish this with an expertise and professionalism unparalleled in the PET bottle industry. Operational Solutions provides products and services for the PET blow molding industry. We are the leading independent service and support organization for SIDEL, SIG, and Krones blow molding. We serve customers around the world from our facilities in Kansas City, Missouri and France. Visit us at: www.operationalsolutions.com
We believe true happiness comes from blazing down the blacktop with the pedal to the metal and our hair on fire. The whiter our knuckles get, the better. If it were up to us, cars wouldn't even have brakes, just two gas pedals. It's this never-ending need for speed that drives everything we do. We spend countless hours in the lab and lying awake at night plotting and planning how to get more speed by any means possible. After decades of research and innovation, we've developed a complete line of performance and car care products designed to ensure that your ride lives up to its potential on the street and on the track. We know what you want. We got what you need. We are 801 Racing. For more information on 801 racing, please visit: 801 Racing -
Release courtesy of THR5 Communications
